9  Custom Parts

How to produce an individual Part with GabbieCam.

9.1 Overview

• Bring Part into place where it can be cut
  • Lock the part to the carts
  • Lock the cart to the track
• Adjust scanning/Adjust Settings “Scan settings” (scan from, scan to etc.)
• Scan
• Set workobject compensation

  • Cut off from pos1=0.0

  • Point 1

    Axis	Value
    x	0.0
    y	0.0
    z	Scan ZOffset

  • Point 2

    Axis	Value
    x	10’0000.0
    y	0.0
    z	Scan ZOffset

• Add a Part and set the final dimensions (diameter/width/height/length)
• Align Part (cylinder or beam) in GabbieCam to the center (x,y,z) of the scandata
• Place the cuts
• Choose workobject wo_Scan
• Create Robot Code
• Cut the Part