10  BTLx

10.1 Status

Describes what is working and what not yet

10.1.1 Jack Rafter Cut

All looks good, start and end

NoteNote

Dimensions may not calculated correct yet. Especially dept is always 300mm. So adjust the correct dept and set originZ to -depth. example:

depth = 123
originZ = -123

10.1.2 Lap

All looks good, start and end

10.1.3 Mortise

All looks good (has no start and end)

10.1.4 Pocket

All looks good (has no start and end)

10.1.5 Slot

All looks good from start and end.

ImportantImportant
  • AngleOppPoint
  • AddAngleOppPoint

are ignored for now

10.1.6 Tenon

All looks good from start and end.